Proceedings

Print This Page Print This Page

*undergraduate student, **graduate student, ***postdoctoral fellow

  1. G. Diloyan**, P. Hutapea. Platinum Particle Agglomeration and Growth in PEM Fuel Cells due to Mechanical Vibrations: Proceedings of ASME 2012 6th International Conference on Energy Sustainability & 10th Fuel Cell Science, Engineering and Technology Conference, San Diego, CA, July 23 – 26, 2012.
  2. Brian Ruiz**, P. Hutapea, K. Darvish, A. Dicker, Y. Yu, Tarun Podder. SMA Actuated Flexible Needle Control using EM Sensor Feedback for Prostate Brachytherapy, IEEE International Conference on Robotic and Automation (ICRA) 2012 Needle Steering Workshop, St. Paul, Minnesota, May 18, 2012.
  3. N. V. Datla***, M. Honarvar**, T. M. Nguyen**, T.K. Podder, Y. Yu, A. P. Dicker, K. Darvish, P. Hutapea. Thermomechanical Behavior of a Smart Actuator for an Active Surgical Needle: 2012 ASME Design of Medical Device Conference, Minneapolis, MN, April 10-12, 2012.
  4. N. V. Datla***, J. Koo**, D. Choi**, S. Assari**, A. Hemmasizadeh**, T.K. Podder, Y. Yu, A. P. Dicker, K. Darvish, P. Hutapea. Mechanical Characterization of Prostate Tissue-Mimicking Phantoms for the Development of an Active Surgical Needle: 2012 ASME Design of Medical Device Conference, Minneapolis, MN, April 10-12, 2012.
  5. G. Diloyan**, P. Hutapea. Platinum Dissolution in Polymer Electrolyte Membrane Fuel Cell Under Mechanical Vibrations: Proceedings of ASME 2011 5th International Conference on Energy Sustainability & 9th Fuel Cell Science, Engineering and Technology Conference, Washington, DC, August 7-10, 2011.
  6. P. Hutapea, T. K. Podder, K. Darvish. Smart Needling System for Fully Conformal Radiation Dose Delivery in Treating Prostate Cancer: 2011 ASME Summer Bioengineering Conference, Farmington, Pennsylvania, June 22 – 25, 2011.
  7. G. Diloyan**, P. Hutapea. PEM Fuel Cell Loses due to Vibration: 6th Fuel Cells Durability & Performance, Knowledge Foundation, December 9-10, 2010 – Boston, MA.
  8. P. Hutapea, T. K. Podder, K. Darvish, A. Dicker, Y. Yu. Smart needling system for fully conformal radiation dose delivery in treating prostate cancer: ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), Philadelphia, PA, September 28 – October 1, 2010.
  9. L. C. Breziner**, P. Strahs*, J. Weaver*, C. Garrant*, K. Shaffer, G. Diloyan**, P. Hutapea. Development of a Hybrid PEM Fuel Cell Vehicle: ASME 8th Annual Fuel Cell Science, Engineering & Technology Conference, Brooklyn, New York, June 14-16, 2010.
  10. L. C. Breziner**, P. Strahs*, P. Hutapea. Influence of Vibration on the Water Transport of PEM Fuel Cells: ASME International Mechanical Engineering Congress and Exposition, Lake Buena Vista, Florida, November 13-19, 2009.
  11. P. Hutapea. Development of a Proof-of-Concept Smart Airplane Control System: ASME SMASIS, Oxnard, CA, September 20-24, 2009.
  12. L. C. Breziner**, P. Strahs*, P. Hutapea. Influence of Vibration on the Water Transport of PEM Fuel Cells: ASME 7th Annual Fuel Cell Science, Engineering & Technology Conference, Newport Beach, California, June 8-10, 2009.
  13. P. Hutapea. Magnetostrictive Actuator for a Bone Transport Device: ASME SMASIS, Ellicott City, MD, October 28-30, 2008.
  14. L. C. Breziner**, P. Hutapea. Development of a PEM Fuel Cell Scooter: ASME 6th Annual Fuel Cell Science, Engineering & Technology Conference, Denver, Colorado, June 16-18, 2008.
  15. R. M. Brooks, P. Hutapea, I. Obeid, L. Bai, K. V. Takkalapelli. Finite Element Method – a Tool for Learning Runway Design: ASEE Mid-Atlantic (Zone I) Conference, West Point, NY, March 28 – 29, 2008.
  16. W. S. Slovinsky**, P. Hutapea. The Influence of Bolting Parameters on the Failure Mechanisms of Fiber-reinforced Composite-Metal Joints: Cancom 2007, Winnipeg, Manitoba, Canada, August 15 – 17, 2007.
  17. L. C. Breziner**, P. Hutapea. The Influence of Harsh Environmental Conditions on the Failure Mechanisms of Carbon Fiber-reinforced Composite-Metal Joints: 18th ASCE Engineering Mechanics Conference, Virginia Tech, Blacksburg, Virginia, June 3 – 6, 2007.
  18. W. S. Slovinsky**, P. Hutapea. The Influence of Bolting Parameters on the Failure Mechanisms of Fiber-reinforced Composite-Metal Joints: 18th ASCE Engineering Mechanics Conference, Virginia Tech, Blacksburg, Virginia, June 3 – 6, 2007.
  19. Y. Luo**, P. Hutapea.  Development of a Bone Lengthening Device for Children: 18th ASCE Engineering Mechanics Conference, Virginia Tech, Blacksburg, Virginia, June 3 – 6, 2007.
  20. P. Hutapea. Improving the Dimensional Stability of Electronic Substrates Influenced by Temperature and Moisture: Proceedings of IMECE, ASME International Mechanical Engineering Congress and Exposition, Orlando, Florida USA, November 5-11, 2005.
  21. B. Bogicevic**, P. Hutapea. Reliability of SMT Packages due to Harsh Conditions: IMAPS 2005: International Microelectronics and Packaging Society, Philadelphia, Pennsylvania, September 25-29, 2005.
  22. P. Hutapea, J. L. Grenestedt, M. Modi, K. Frutschy, M. Mello. Prediction of CPU Substrate Warpage Using Homogenized Thermomechanical Finite Element Models: ASME Interpack05, San Francisco, California, July 17-22, 2005.
  23. A. Shugar, M. Notis, L. Limata, D. N. Wong, P. Hutapea, H. Rubin. Early Chinese Scissors and Shears: Category, Design and Shape: A Metallurgical Study: 34th International Symposium on Archaeometry, 3-7 May 2004, Zaragoza, Spain.
  24. P. Hutapea, J. L. Grenestedt. Tuning Electric Artworks of Printed Circuit Boards to Reduce Warpage: 9th International Symposium and Exhibition on Advanced Packaging Materials, IEEE CPMT, Atlanta, Georgia, March 24 – 26 2004. Best Paper Award
  25. J. L. Grenestedt, P. Hutapea, K. Frutschy. Prediction of CPU Substrate Warpage using a Combined Homogenization and Finite Element Method. Mechanics and Materials Conference, Scottsdale, Arizona, June 17 – 20, 2003.
  26. P. Hutapea, F. G. Yuan, N. J. Pagano. Microstress Prediction in Composite Laminates with High Stress Gradients: Proceedings of the American Society for Composites (ASC) 17th Technical Conference, West Lafayette, Indiana, October 2002.
  27. P. Hutapea, F. G. Yuan. Mode-I Fracture Toughness of IM7/LaRC-RP46 Composites Under Thermal Aging: 39thAIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Long Beach, California, 1998.
  28. P. Hutapea, J. Wang, P. Graham, E. Setiawan, G. K. Lee. A Teleoperated Mobile Robocrane: Testbed For Control Algorithm Verification: International Society for Computers and Applications (ISCA) 11th International Conference, San Francisco, California, 1996.
  29. J. Wang, P. Graham, P. Hutapea, E. Setiawan, G. K. Lee. A Mobile Manipulator System Using the Robocrane: International Society for Computers and Applications (ISCA) 10th International Conference, pp. 298-302, Indianapolis, Indiana, 1995.